LayerTrove
EN

Split Cable Grommet for Case Slots

Computers & accessories
Two long, slim black strips with openings, shown closely side by side.
Digital model preview

About this model

This cable grommet uses two slim panel halves for an open slot on a computer case. Slim, separate outer connectors hold the halves together. The split design lets you place jacketed cables into the cutouts and close the grommet around them. This makes planning easier for cables with larger connector heads.

Measure the case opening and the cable cross-section at the intended pass-through. The grommet must fit the opening, while the cable should have some clearance in its channel. Also check how much room the cable bend needs behind the slot.

360° turntable view of the individual printed parts.